Comparison of approaches to the numerical modelling of pure metals solidification using the control volume method

The thermal processes proceeding in the casting-mould system are analysed. Solidification process can be described in the different ways. One of them consists in the application of the Fourier–Kirchhoff equation in which the source function controlling the phase change is introduced. In this paper, two approaches to the modelling of pure metals solidification, i.e. the solidification proceeding at the constant temperature and in the artificially introduced interval of temperature are considered. Numerical model used at the stage of computations is constructed using the Control Volume Method in which the principle of conservation of energy (taking also into account the release of latent heat of solidification) is applied to each control volume ensuring the correctness of the model. The use of Voronoi/Thiessen tessellation to the discretization of the casting-mould system can accurately reproduce the shape of each sub-domain. In the final part of the paper, the examples of computations are shown.     

基于凸闭包集的不规则三角网算法研究与实现

不规则三角网是影响土石方量计算的关键问题之一，虽然目前已有大量研究人员对Delaunay三角网进行优化，但仍然缺少对三角网生成速率和计算精度的综合研究。针对此问题，基于VB.NET平台的点、边以及三角形的结构化数据结构设计快速生成凸闭包集形成Delaunay三角网，通过四边形空圆特性以及对角线最短原则对构网结果进行检验和优化。试验计算表明，该算法的计算结果与经典DTM法、方格网法的土方量计算相对误差均在0.30%以内。该方法不仅具有较高的组网效率，并能保持较好的计算精度。     

温拌LDPE改性沥青混合料性能研究

选择Sasobit和Evotherm 3G两种温拌剂对温拌LDPE沥青混合料制备工艺和性能进行研究。首先,比较变温等体积法和等黏温度法两种方法,并确定两种温拌混合料的拌和及击实温度。在此基础上,分别采用车辙试验、低温弯曲试验、中点加载弯曲试验以及冻融劈裂试验评价70#、LDPE、Sasobit-LDPE以及3G-LDPE四种沥青混合料的高温性能、低温性能、疲劳性能和水稳定性。结果表明,两种温拌技术均是可行的,Sasobit和3G温拌技术可使施工温度降低20℃和15℃。与热拌LDPE沥青混合料相比,Sasobit温拌沥青混合料具有更好的高温性能和水稳定性,在高应力比条件下抗疲劳性能更好,低温性能虽变差,但是优于70#沥青混合料;3G温拌沥青混合料的高温性能,低温性能以及水稳定性则与热拌LDPE沥青混合料各项性能较为接近,抗疲劳性能变差,但是优于70#沥青混合料。     

基于RFID标签阵列的睡眠期间呼吸量连续监测系统

睡眠期间连续且准确的呼吸量监测有助于推断用户的睡眠阶段以及提供一些慢性疾病的线索。现有工作主要针对呼吸频率进行感知和监测,缺乏对呼吸量进行连续监测的手段。针对上述问题提出了一种基于商用无线射频识别(RFID)标签的无线感知用户睡眠期间呼吸量的系统——RF-SLEEP。RF-SLEEP通过阅读器连续收集附着在胸部表面的标签阵列返回的相位值及时间戳数据,计算出呼吸引起的胸部不同点的位移量,基于广义回归神经网络(GRNN)构建胸部不同点的位移量与呼吸量之间的关系模型,从而实现对用户睡眠期间呼吸量的评估。RF-SLEEP通过在用户肩膀处附着双参考标签,消除用户睡眠期间翻转身体对胸部位移计算造成的误差。实验结果表明,RFSLEEP对不同用户睡眠期间的呼吸量连续监测的平均精确度为92.49%。     

Predicting the density of molten alloys using computational thermodynamics

The density of a molten alloy can be calculated from the quotient of its molar mass divided by its molar volume. The molar volume of a molten alloy, however, often deviates from the average of the molar volumes of its constituents. The deviation is caused mainly by the affinity (or lack of it) between dissimilar atoms, which can be quantified by the enthalpy of mixing. Up to now, the link between the enthalpy of mixing and the volume change has been determined empirically through the regression of experimental measurements of alloy densities. In the present study, the derivative of molar volume with respect to enthalpy was deduced and the molar volumes of molten alloys were computed entirely based on the properties of pure elements and the enthalpy of mixing of the alloys. The very slight increase in the packing density due to the size difference of different atoms was also considered. The effect of cluster formation due to short range ordering was also addressed. Over six hundred data points were used in validations. Excellent agreements were achieved between the calculated values and the experimental measurements.     

优化作业方式提高始极片质量

针对某厂铜电解种板工序存在的始极片质量波动较大的问题,从种板系统体积控制和添加剂匹配的角度出发,分析各种因素对始极片质量的影响,做出了相应的改进措施,使种板系统运行更加稳定,始极片质量得到进一步提升。     

无人机在露天矿方量计算中的应用

随着社会的不断发展,人们越来越重视露天矿的测绘工作。尤其是最近几年,无人机技术不断成熟,工程技术人员可以利用无人机进行露天矿方量计算,从而保证勘测工作的准确性与高效性。本文主要围绕无人机技术的相关概述进行分析,探讨利用无人机进行露天矿方量计算的有效途径,从而为相关技术人员提供一定的理论参考。     

Structural fatigue crack growth on a representative volume element under cyclic strain behavior

By introducing parameters λ and ω into the crack tip field, a unified cyclic stress and strain field was first formulated by using the Hutchinson-Rice-Rosengren (HRR) field and the Rice-Kujawski-Ellyin (RKE) field under plane stress states in the present study. On the basis of the plastic strain energy and the linear damage accumulation, two fatigue crack growth models without any artificial parameters were then proposed from a representative volume element of cyclic strain behavior. The fatigue crack growth model included parameters λ and ω which showed the effect of two singularity fields. In addition, a simplified structural fatigue crack growth model was eventually established in terms of the fatigue life of each point on the crack front and the non-self-similar shape evolution law. Finally, the predictions of models are compared with the experimental data and the agreement is found to be fairly good.     

Origin of stress overshoot in amorphous solids

Based on the shear-transformation-zone (STZ) theory, we propose a constitutive model for describing homogeneous elastoplastic deformation of amorphous solids where the interaction of shear transformations and free volume dynamics is incorporated. This theoretical model can reproduce the stress overshoot behavior that shows the dependence of strain rate, temperature, STZ population and dilatancy of systems. It reveals that the stress overshoots its steady state value due to the delayed activation of shear transformations that results from the insufficient free volume in the system. However, the subsequent strain softening (stress drop) is attributed to the shear-induced dilatation that is a result of the positive interplay between shear transformations and free volume creation, the latter playing the dominant role. Our analysis also demonstrates that the STZs, as basic carriers of amorphous plasticity, govern the yielding of the system, whereas the free volume dynamics significantly affects the post-yielding behaviors.     

Design and experimental investigation of the high efficiency 1.5 W/4.2 K pneumatic-drive G-M cryocooler

The development of a high cooling power and high efficiency 4.2 K two stage G-M cryocooler is critically important given its broad applications in low temperature superconductors, MRI, infrared detector and cryogenic electronics. A high efficiency 1.5 W/4.2 K pneumatic-drive G-M cryocooler has recently been designed and developed by ARS. The effect of expansion volume rate and operation conditions on the cooling performance has been experimentally investigated. A typical cooling performance of 1.5 W/4.2 K has been achieved, and the minimum temperature of the second stage is 2.46 K. The steady input power of the compressor at 60 Hz is 6.8 kW, while the operation speed of the rotary valve is 30 rpm. A maximum cooling power of 1.75 W/4.2 K has been obtained in test runs.